CLUTCH PARTS

 

REF.

PART NO.

DESCRIPTION

QTY.

YEAR

1

20B20

Nut - Clutch Sprocket

1

22-53

 

27T350

Tool - Clutch Sprocket Nut Wrench

1

22-53

2

20B62

Washer - Clutch Sprocket Nut Locking

1

22-53

3

762018

Seal - Clutch Sprocket to Transmission Case

1

52-53

4

17A363K

Shim Kit - Clutch Sprocket

1

28-53

5a

20B14

Bushing - Clutch Sprocket

1

22-51

5b

247007

Bushing - Clutch Sprocket

1

52-53

 

 

  • Bushing 247007 is shorter than bushing 20B14 as it is intended to be used in conjunction with seal 762017. If you do not wish to separate the transmission and primary drive oils, use the longer bushing 20B14 and do not use the seal.

 

 

6

762017

Seal - Clutch Sprocket to Transmission Main Shaft

1

52-53

7

85376

Clutch Sprocket Assembly (includes ref. 8)

1

34-51

8

85376S

Stud - Clutch Sprocket

6

34-53

9

387004

Hub - Clutch

1

47-53

 

 

  • This hub will retrofit back to 1922-46 models

 

 

10

538115

Key - Clutch hub

1

22-53

11

20B757

Washer - Clutch Hub Nut Locking

1

22-53

12

20B38

Nut - Clutch Hub

 

 

 

 

  • When removing this nut, note that it has a left hand thread. Our clutch hub nuts are purposely made a little softer than the transmission mainshaft. In the event someone turns the nut the wrong way, the nut will strip before damaging the threads on the big dollar mainshaft.

 

 

13a

KI 10102

Clutch Friction Plate Set (includes 6 ea. 1/8" thick plates, and 2 ea. 3/16" thick plates)

1

25-53

*

KI 10102K

Clutch Overhaul Kit (includes ref. 13a, 14 & 19-21)

1

25-53

 

 

  • KI 10102 & KI 10102K are the same as the original but we groove the face of each plate for easier clutch release.

 

 

13b

KI 10150

Kevlar Clutch Friction Plate Set

1

25-53

*

KI10150K

Kevlar Clutch Overhaul Kit (includes ref. 13b, 14 & 19-21)

1

25-53

 

 

  • KI 10150 & KI 10150K use Kevlar friction material bonded to aluminum plates. Aluminum plates maintain balance during operation and are lighter (aprox. 380 g) compared to friction plates bonded to steel (aprox. 1010 g).

 

 

13c

KI 10160

Composite Clutch Friction Plate Set

1

25-53

*

KI10160K

Composite Clutch Overhaul Kit (includes ref. 13b, 14 & 19-21)

1

25-53

 

 

  • KI 10160 & KI 10160K use composite friction material bonded to aluminum plates. Aluminum plates maintain balance during operation and are lighter
    (aprox. 400 g) than friction plates bonded to steel (aprox. 1010 g).

 

 

14

22B33

Plate - Steel (heat treated)

6

22-53

 

 

  • Kiwi steel plates have the most depth engagement along the drive tabs (mating surface with the clutch hub) of any steels on the market. Drive tabs also have sharp corners for additional drive surface area, increasing steel plate life.

 

 

15

43441

Worm - Clutch Release (3.125" long)

1

41-53

 

 

  • Model 1936-40 clutch release worms are shorter. Do not mismatch.

 

 

16

24B39/0

Bearing - Clutch Release

1

24-53

*

24B39/0R

Replacement Bearing - Clutch Release

1

24-53

 

 

  • We came up with bearing 24B39/0R since the original style bearing was not available for quite some time. If this bearing is used, the outside diameter of the clutch release worm has to be reduced slightly to accept the heavy duty bearing races.

 

 

17

22B39

Plate - Clutch Release (inner)

1

22-53

18

22B102

Plate - Clutch Release (outer)

1

22-53

19

22B36

Spring - Pressure Plate

16

22-53

 

 

  • Some springs on the market have inadequate spring tension which causes the clutch to slip under load. Be aware just because you are fitting new springs it does not mean your clutch will work properly.

 

 

 

23T269

Tool - Clutch Spring/Plate Compressor

1

22-53

20

20B56

Washer - Lock (folding tab)

6

22-53

21

--

Nut - Jam 5/15-24

6

22-53

*

A16260K

Nut & Washer Kit (includes 6 ea. ref. 20 & 21)

1

22-53

22

43442

Housing - Clutch Release Worm

1

34-53

23

763003

Seal - O-Ring (replaces original felt seal)

1

22-53

24

20B50

Cap - Dust (knurled)

1

22-53

 

101826

Tool - Dust Cap Pliers

1

22-53

25

24B49

Spacer - Clutch Release Worm

1

24-53

*

24B49K

Clutch Release Worm Spacer Seal Kit

1

24-53

 

 

  • The spacer seal kit prevents typical oil leaks in this area (eliminates p/n 24B49). The kit incorporates special seals and is recommended as an upgrade for every Indian.

1

24-53

26

23B80

Lever - Clutch Release Worm

1

22-53

27

--

Washer - Internal Tooth Lock 1/2"

1

22-53

28

602004

Nut - Domed Hex 1/2-24

1

22-53

*

20B295

Nut Hex 1/2-24

1

22-53

29

22B102R

Pressure Plate Assembly (sold as a set of inner and outer plates)

1

22-53

 

 

  • Made from solid billet aluminum. This assembly is lighter (aprox. 325 g) and stronger than the original components (aprox. 670 g), and greatly reduces clutch chatter.

 

 

30

KI 10124

Oil - 50 wt Primary Drive/Transmission (for shared system 3-speed models)

A/R

22-51

*

KI10124P

Oil - Primary Drive (for separated system models)

A/R

22-51

*

KI 10124S3

Oil - 85/140wt Synthetic Primary Drive/Transmission

(for shared system 3-speed models)

A/R

22-51

*

KI 10124S3

Oil - 85/140wt Synthetic Transmission (for separated system 3-speed models)

A/R

52-53

*

KI 10124S4

Oil - 85/90wt Synthetic Transmission (for separated system 4-speed models)

A/R

34-53

*Not Illustrated